Maintenance2708−1/A1
Winterthur Gas & Diesel Ltd.
4/ 6
10) Prepare an applicable working area for
the exhaust valve (2, Fig. 5).
11) Connect the crane hook to the bolt of
the exhaust valve cage (1).
12) Use the engine room crane to lift
exhaust valve cage (2) and put it on a
wooden underlay.
13) For further works on the exhaust valve,
see 2751−2.
14) Use the crane to attach the suspension
device 94265 (70 kg) to the elastic
studs (1).
15) Tighten the nuts (4).
16) Use the engine room crane to move the
cylinder cover (3) in an applicable area.
2015
Removal and Installation of Cylinder Cover, Water Guide Jacket, Exhaust Valve
1
1
94265
WCH02934
Fig. 5
WCH02934
Fig. 6
3
4
To Next Page
Loading...
