WinGD X92 - Page 4

1/3
31/12/2021
Modification Service
Engine Documentation
W-X92
Summary for Maintenance Manual
Page No.
Modification
Title
Subject
Page or
Date
No.
Manual
new
exch.
2015
Maintenance Manual, Issue 2015
x
Date of publication 2015-03-11
0380
2015-08
New Data for maintenance Schedule: hoses
x
5556-1/A1 (17)
2015-08
RT-180
better description of oil flow check
x
6545-1 (all
pages)
2015-08
EAAD085862
New Tool for auxiliary blower replacement (94651)
x
9403-5/A1
2015-08
EAAD085862,
EAAD085741,
EAAD085709
New Tool for auxiliary blower replacement (94651), new Tool
for intermediate wheel replacement (94412), additional tool for
B24 cooler (94663..)
x
Date of publication 2015-08-08
0002-1/A1
2015-12
Table of Contents
New document for lubrication during maintenance work
x
Group 5
2015-12
New document for lubrication during maintenance work
x
0352-1/A1 (9)
2015-12
EAAD085854
Correction of tightening instruction position 29
x
0380-1/A1
2016-01
Maintenance Intervalls
Major update of maintenance intervals, please check all
(Injectors, FOP, Main Bearings …)
x
2722-2/A1 (3)
2015-08
Correction of injection nozzle test procedure
x
5551-1/A1
2015-09
Servo oil pump
New tool for replacement of SOP No. 1
x
5552-2/A1
2015-12
New document for lubrication during maintenance work
x
9403-5/A1
2015-12
EAAD085931E
AAD085666EA
AD086296
Pge 7: Tool change (94117B). Pge 11: Dimensions changed
to tools 94143, 94144. Pge 22: Tool change (94338), new
lubrication device 94844
x
3425-1/A1 (8)
2016-02
Correction of ring type designation
x
Date of publication 2016-01-06
0352-1/A1
2016-10
EAAD085854
Tightening Values of
Important Screwed
Connections
Pge 1: Illustration changed. Pge 9 to 12:Never Seez NSBT8
changed to Never Seez Regular
x
0360-1/A1
2016-10
EAAD086104
Individual Weight of
Components
Pge 3: ABB 270L and ABB 280L and SAC B20-SF added
x
0380-1/A1
2016-10
EAAD086844
Input WinGD.
Technical
Bulletin RT-
188
Maintenance
Schedule
Page 1: Changes to bedplate (condition of rubber gasket)
intervlals. Page 2: Cylinder Cover - re-manufacturing as
necessary added, Page 4: Connecting rod bearings - Changes
to bearing clearances and check with wire intervals. Random
check added, Page 6: ICU interval changed: 30000 to 36000.
Page 9: reference to ALM-20 removed. Page 3: reference to
2745-1 removed. This data has moved to 9308-1/A1.
Pge 1, data added to 1224-1. Page 2, data added to 2708-1.
Pge 3, data added to 2722-1, Pge 6, data added to 5551-1,
5552-1 & 55561-1. Pge 7, data added to 5612-1. Pge 10, data
added to WECS-9520
x
1132-2/A1
2017-01
WinGD Input
Main Bearing:
Removal and
Installation
Pge 1: Note added
x
1132-2/A2
2016
WinGD Input
Main Bearing -
Removal and
Installation
Different procedure with new tool
x
3303-2/A1
2017-01
WinGD Input
Bottom End Bearing:
Removal and
Installation
Pge 1: Note added
x
3303-2/A2
2017
WinGD Input
Bottom End Bearing
Different procedure with new tool
x
3303-5/A1
2017-01
WinGD Input
Top End Bearing:
Removal and
Installation
Pge 1: Note added
x