Maintenance5556−1/A1
Winterthur Gas & Diesel Ltd.
18/ 18
7. Storage
Do the procedure that follows to put the fuel pump into storage:
1) Make sure that the storage area is clean and dry.
2) Put oil on the fuel pump to prevent contamination.
3) Put the pump in a vertical position.
4) Put petroleum jelly (e.g. Vaselinet) in the oil inlet and oil drain bores of the fuel
pump.
5) Put the plastic stoppers into the open spaces.
6) Put a cover (material or plastic) on the fuel pump.
Fuel Pump: Disassemble, Assemble
2015
To Next Page
Loading...
