WinGD X92 - Page 469

Maintenance
7218−1/A1
Winterthur Gas & Diesel Ltd.
1/ 6
Cylinder Lubrication System
1. Cylinder Lubricating System 1.......................................
1.1 Cylinder Lubricating System − Operate 1.......................
1.2 Function Check 3.............................................
2. Cylinder Lubrication Pump 3........................................
2.1 Checks 3.....................................................
3. Cylinder Lubricating System − Bleed 4...............................
3.1 Cylinder Lubrication Pump 4..................................
3.2 Oil Pipes 4...................................................
4. Duplex Filter 5......................................................
4.1 Clogged Filter Element − Replace 5............................
4.2 Filter Element − Clean 5.......................................
1. Cylinder Lubricating System
For more data about the cylinder lubricating system, see the Operation Manual,
7218-1.
1.1 Cylinder Lubricating System − Operate
For more data, see the Operation Manual, 4002−3, paragraph 2.
1) In the flexView, get the flexView LUB card.
2) Select the applicable cylinder number.
3) If necessary, change the number of lube pulses (in the range 0 to 200)
Note: You can operate the 4/2-way solenoid valve (6, Fig. 1) to release manually
one lube pulse.
2015
5
5