WinGD X92 - Page 6

3/3
31/12/2021
Modification Service
Engine Documentation
W-X92
Summary for Maintenance Manual
Page No.
Modification
Title
Subject
Page or
Date
No.
Manual
new
exch.
5564-1/A2
2017-11
EAAD087878
Injection Control Unit -
Removal and
Installation
Pge 1: Illustration replaced with X92 item.
x
2124-2-A2
2017
EAAD088154
Cylinder Liner:
Removal and
Installation (with
optional tool)
New document: Includes optional tool to remove and install the
water guide jacket.
x
Date of publication 2017-12-19
0330-1/A1
2018
WinGD input
Clearance Table
Pge 21: Clearance at Key 2 changed. Note added.
x
2751-2/A1
2018
WinGD input
Exhaust Valve:
Disassemble and
Assemble
Pge 6. Steps 4 to 11 changed.
x
5564-1/A1
2018
WinGD input
Injection Control Unit
Pge 1: 94022A-10L - Long hexagonal head driver added to
Tools List. Step 2 and Step 3: text change.
x
Date of publication 2018-02
0380-1/A1
2020-05
WinGD Input
Maintenance
Schedule: Inspection
and Overhaul Intervals
(Guidelines)
Pge 73 to 82 updated
x
5583-1/A1
2020-05
WinGD Input
Fuel Pump Actuator
Connection to Fuel
Pump
New procedure
x
5583-1/A2
2020-05
WinGD Input
Faults in High Pressure
Fuel System
New procedure
x
5612-1/A1
2020-05
WinGD Input
Servo Oil Rail
Exhaust Valve Control
Unit -- Pilot valve:
Removal and
Installation
Pge: 405 & 406 updated
x
Group 5 ToC
2020-05
WinGD Input
Group 5 ToC
5583-1/A1 - Fuel Pump Actuator
Connection to Fuel Pump ; 5583-1/A2 - Faults in High Pressure
Fuel System added
x
6606-1/A2
2020-05
WinGD Input
Scavenge Air Cooler -
Cleaning Instructions
New procedure
x
Group 6 ToC
2020-05
WinGD Input
Group 6 ToC
6606-1/A2 - Scavenge Air Cooler - Cleaning Instructions added
x
Date of publication 2020-06
Logo
2021-12
WinGD Input
Logo
WinGD logo updated as per new style guide.
x
2708-1/A1
2021-12
WinGD Input
Cylinder Cover -
Removal and Fitting of
Cylinder Cover and
Upper Water Guide
Jacket
Warnings Updated
x
2708-3/A1
2021-12
WinGD Input
Cylinder Cover -
Removal and Fitting of
Cylinder Cover and
Upper Water Guide
Jacket
Warnings Updated
x
0011-1/A1
2021-12
WinGD Input
Cylinder Cover -
Machining of Sealing
Face for Injection
Valve
Procedure Updated
x