General Procedures and Information
Phaser 3200MFP / Workcentre PE220 04/07 6-27
(b) Charge Voltage (MHV)
- Input Voltage: 24 V DC +15% / -10% (21.6V~27.6V)
- Out Voltage: -1300KV 50V(50 Load)
- Out Voltage Rising Time: 50 ms Max
- Out Voltage Falling Time: 50msMax
- Out Voltage Range: 30 ~ 1000
- Output Control Signal (MHV-PWM): Active Low PWM signal for controlling MHV
(c) Developing Voltage (DEV)
- Input Voltage: 24V DC +15% / -10% (21.6V~27.6V)
- Output Voltage: -350V 20V (50 Load)
- Output Voltage Fluctuation range: PWM Control
- Input contrast of the output stability degree: 5% or less
- Loading contrast: 5% or less
- Output Voltage Rising Time: 50 ms Max
- Output Voltage Falling Time: 50 ms Max
- Output Loading range: 10 ~1000
- Output Control Signal (BIAS-PWM): Active Low PWM signal for controlling MHV
(d) Supply
- Output Voltage: -550V 50V(50 Load)
- Input contrast of the output stability degree: under 5%
- Loading contrast: 5% or less
- Output Voltage Rising Time: 50 ms Max
- Output Voltage Falling Time: 50 ms Max
- Output Loading range: 10 ~ 1000
- Output Control Signal (BIAS-PWM): Active Low PWM signal for controlling MHV
To Next Page
Loading...
