Xerox Phaser 3200MFP - In the Fuser Area or Around the Print Cartridge

General Procedures and Information
Phaser 3200MFP / Workcentre PE220 04/07 6-37
Workcentre PE220 Tech Mode
Table 1: Workcentre PE220 Tech Mode
1st level 2nd level 3rd level 4th level
1 Tech Mode
W Data SetupX
Data Setup Send Level -9~-15
DTMF Level
Pause Time
Dial Mode Tone, Pulse
Modem Speed 33.6, 28.8, 14.4, 12.0, 9.6, 4.8 33.6
Error Rate 5%, 10%
Notify Toner Customer No.
Customer Name
Service No.
Serial No.
Clear All Mem.
Clear Count Total Page Count
CRU Print CNT
FLT Scan Count
ADF Scan Count
Used Toner CNT
Edit Toner Dot
Flash Upgrade Local
Remote
Silence Time Off/ 12 Sec/Unlimited
Machine Test Switch Test Reduce Panel
Complete Panel
Modem Test
Dram Test
Rom Test
Pattern Test
Shading Test
Report Protocol
System Data
Key History
Error Info
New Cartridge Yes/No