Copy
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
5-3
4. Open the document stopper.
Document Glass
Document sizes supporting automatic detection
The document size is detected automatically when Original Size is set to Auto.
The following document sizes are detected automatically: A3 , B4 , A4 , A4 , B5 , B5 , A5
, 11 × 17" , 8.5 × 11" , 8K , 16K , and 16K .
Notes
• When copying multiple pages of a document, the document size of the first document page is set
to copy the rest of the document.
• The machine automatically determines the tray holding the appropriate paper, based on the
document size and the specified zoom ratio.
Supported document sizes
You can select one of the following document sizes for using the document glass.
A3 , B4 , A4 , A4 , B5 , B5 , A5 , 11 × 17" , 8.5 × 14" , 8.5 × 13" , 8.5 × 11" , 8.5
× 11" , 8K , 16K , and 16K .
Notes
•When Original Size is set to Auto, an error screen appears when you place a non-standard size
document on the document glass. In this case, select a document size manually by selecting
Original Size from the menu items. Depending on the selected document size, the printout may
be too large for the paper or may have shadows at the edges.
• You can select a custom paper size specified for Tray 5 (bypass) using the Custom Paper Size
Settings. For more information, refer to Custom Paper Size Settings on page 9-18.
CAUTION: Do not apply excessive force to hold a thick document on the document glass. Doing
so may break the glass and cause injuries.
Follow the steps below to place a document on the document glass.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
