Yamaha F350B - Installing the Intake Silencer

6-12
Intake manifold
b. Fasten the fuel injector lead “1” and
ground lead “2” using the holders “3”.
c. Fasten the fuel injector lead “1” and
ground lead “2” using the holders “3”.
5. Install:
• Drain hose
a. Install the drain hose “1” into the guides “a”
on the intake manifold.
Installing the intake silencer
1. Install:
• Joint
• Plastic tie
• Intake silencer
• Intake air pressure/temperature sensor
• Blowby hose
2. Connect:
• Intake air pressure/temperature sensor
coupler
3
1
2
STBD
3
1
PORT
2
a
a
1
Intake air pressure/temperature
sensor screw
3.5 N·m (0.35 kgf·m, 2.6 lb·ft)
New
T
R
.
.