Yamaha F350B - Removing the Power Unit

7-8
Power unit assembly
Removing the power unit
1. Remove:
• Plastic tie “1”
• Rigging tube retainer “2”
2. Remove:
• Grommet holder “1”
• Rigging grommet “2”
3. Disconnect:
• Battery cable “1”
• SCU lead “2”
4. Remove:
• Clip “1”
5. Disconnect:
• PTT motor lead “1”
6. Remove:
• Holder “2”
• PTT motor lead “1” (from the holder “3”)
7. Disconnect:
• Extension wire harness coupler “a”
1
2
2
2
1
1
2
1
2
3
1
a