Yamaha F350B - Installing the Low-Pressure Fuel Pump

6-20
Low-pressure fuel pump
Installing the low-pressure fuel pump
1. Install:
• Low-pressure fuel pump
a. Connect the fuel hose “1” to the low-pres-
sure fuel pump “2” and joint “3”, and then
fasten the fuel hose “1” using the clamp
“4”.
b. Install the low-pressure fuel pump “2” and
cover “5”, and then tighten the cover bolts
“6” to the specified torque.
c. Connect the fuel hose “1”, and then fasten
it using the clamps “2”.
d. Install the fuel hose “1” to the holders “3”,
“4” and “5”.
e. Connect the fuel hose “1”, and then fasten
it using the clamp “2”.
f. Connect the fuel hose “3” to the joint and
fasten the fuel hose using a new plastic tie
“4”, and then install the fuel hose to the
holder “5”.
g. Connect the low-pressure fuel pump cou-
pler “a”.
h. Fasten the vapor gas hoses “1” and “2” us-
ing the holder “3”.
Cover bolt “6”
5 N·m (0.5 kgf·m, 3.7 lb·ft)
1
2
3
4
4
5
6
T
R
.
.
2
1
3
5
4
2
1
5 4
3
a
3
1 2