Yamaha F350B - Bracket Unit

Bracket unit
Molding ............................................................................... 9-1
Shift rod and SPS............................................................... 9-2
Installing the shift rod and SPS .................................................. 9-3
PTT switch and cowling lock lever................................... 9-4
Installing the flushing hose ......................................................... 9-6
Installing the SBW harness ........................................................ 9-6
Installing the PTT sensor lead.................................................... 9-6
Bottom cowling .................................................................. 9-7
Upper case and mounts .................................................... 9-8
Removing the upper case .......................................................... 9-9
Installing the upper case ............................................................ 9-9
Upper case........................................................................ 9-12
Disassembling the upper case ................................................. 9-13
Checking the exhaust guide anode .......................................... 9-14
Checking the drive shaft bushing ............................................. 9-14
Assembling the upper case ...................................................... 9-14
Oil pan and exhaust manifold ......................................... 9-16
Checking the oil pan and exhaust manifold.............................. 9-17
Checking the oil strainer........................................................... 9-17
Assembling the oil pan and exhaust manifold .......................... 9-17
Steering actuator and steering arm................................ 9-19
Removing the power steering unit............................................ 9-20
Removing the steering arm ...................................................... 9-21
Checking the steering arm and steering arm joint.................... 9-21
Installing the steering arm ........................................................ 9-21
Installing the steering actuator ................................................. 9-22