Yamaha F350B - Assembling the Upper Case; Checking the Drive Shaft Bushing; Checking the Exhaust Guide Anode

9-14
Upper case
Checking the exhaust guide anode
1. Check:
• Anode
Eroded (1/2 or more worn out)  Replace.
Adhered grease, oil, or scales  Clean.
Do not apply grease, oil, or paint to the an-
ode.
Checking the drive shaft bushing
1. Check:
• Drive shaft bushing
Cracked/worn  Replace.
Assembling the upper case
1. Install:
• Bushing “1”
2. Install:
• Collar “1”
•Circlip “2”
Puller head “4”
90890-06514
Slide hammer “4”
YB-06096
Slide hammer handle “5”
90890-06531
Propeller shaft and bearing hous-
ing remover “6”
YB-06335
3
3
1
2
2
A
A. Worldwide
B. USA and Canada
Needle bearing attachment “2”
90890-06611
Driver rod L3 “3”
90890-06652
Forward gear bearing installer “4”
YB-06345
Driver handle (large) “5”
YB-06071
5
5
1
4
B
4
2
1
2
1