Yamaha F350B - Page 231

6-15
ETV
4. Install:
• Bracket “1”
• Vapor gas hose “2”, “3”
a. Install the vapor gas hoses “2” and “3” to
the holder “4”.
5. Connect:
• Pressure regulator hose “1”
• Vapor gas hose “2”
6. Install:
• Pressure regulator hose “1”
(to the holder “3”)
• Vapor gas hose “2”
(to the holders “4”, “5”)
7. Install:
• Gasket “1”
•ETV “2”
• Bracket “3”
• Holder “4”
TIP:
Check that the tab on the gasket “1” is properly
and firmly fitted into the groove “a” in the surge
tank.
8. Connect:
• ETV coupler “a”
3
1
4
2
2
1
5
4
3
New
a
1
2
3
4
a