Yamaha F350B - Page 265

7-17
Flywheel magneto
4. Install:
• Heat exhaust fan “1”
• Heat exhaust fan bolt “2”
TIP:
Tighten new heat exhaust fan bolts “2” to the
specified torques in 2 stages and in the order
[1], [2], and so on.
Rotor holding tool (including han-
dle and 3 pins) “2”
90890-04195
Universal magneto and rotor hold-
er “2”
YU-01235
Flywheel stopper B “3”
90890-06686
Flywheel stopper B “3”
YB-06686
Flywheel magneto bolt “1”
1st: 40 N·m (4.0 kgf·m, 30 lb·ft)
2nd: 90
Heat exhaust fan bolt “2”
1st: 8 N·m (0.8 kgf·m, 5.9 lb·ft)
2nd: 8 N·m (0.8 kgf·m, 5.9 lb·ft)
T
R
.
.
[1]
[6]
[4]
[3]
[5]
[2]
1 2
T
R
.
.