Zebra TC75 User Manual

Applications 4 - 37
Advanced Settings
Use the Advanced setting to configure data capture options. In the data capture screen, touch in the bottom
right corner of the screen.
Figure 4-31 Advanced Settings Screen
• Identification Timeout - Set the amount of time to wait before timing out identifying the target document.
Options: 2 seconds, 5 seconds, 10 seconds, 15 seconds, 20 seconds or 25 seconds.
• Processing Timeout - Once the target document is identified, amount of time to wait before timing out
processing.
• Audio Feedback - Turn on or off audio feedback on successful parse.
• Haptic Feedback - Turn on or off haptic (vibration) feedback on successful parse.
• LED Feedback - Turn on or off LED feedback on successful parse.
• Debug Mode - If enabled, allows a session to write form capture, region images, region values, and other
data to storage. Use only when directed by administrator.
• Auto Capture - Set to On to automatically capture forms when detected. Set to Off to manually capture
forms when user taps screen or presses a trigger button.
• Image Correction - Turn on when document is crumpled or curved and requires advanced image correction.

Zebra TC75 Specifications

General

Display Size	4.7 inches
Resolution	1280 x 720 pixels
Operating System	Android
Battery Capacity	4620 mAh
Cellular Connectivity	4G LTE
GPS	Yes
Humidity	5% to 95% non-condensing
Camera	8 MP rear camera
Wireless Connectivity	Wi-Fi 802.11 a/b/g/n
Ruggedness	MIL-STD-810G
Operating Temperature	-20° C to 50° C
Barcode Scanner	1D/2D imager
RAM	1 GB
Storage	8 GB
Expandable Storage	up to 32 GB microSD
Dimensions	6.3 x 3.3 x 1.1 inches