Wireless 6 - 19
4. Touch .
Disabling Bluetooth
1. Touch > .
2. Touch Bluetooth.
3. Slide the Bluetooth switch to the OFF position.
4. Touch .
Discovering Bluetooth Device(s)
The TC75 can receive information from discovered devices without pairing. However, once paired, the TC75 and a
paired device exchange information automatically when the Bluetooth radio is on. To find Bluetooth devices in the
area:
1. Ensure that Bluetooth is enabled on both devices.
2. Ensure that the Bluetooth device to discover is in discoverable mode.
3. Ensure that the two devices are within 10 meters (32.8 feet) of one another.
4. Touch > .
5. Touch Bluetooth.
6. The TC75 begins searching for discoverable Bluetooth devices in the area and displays them under Available
devices.
7. Scroll through the list and select a device. The Bluetooth pairing request dialog box appears.
Figure 6-12 Bluetooth Pairing
8. Touch Pair on both devices.
9. The Bluetooth device is added to the Bluetooth devices list and a trusted (“paired”) connection is established.
Changing the Bluetooth Name
By default, the TC75 has a generic Bluetooth name that is visible to other devices when connected.
1. Touch > .
2. Touch Bluetooth.
3. If Bluetooth is not on, slide the switch to the ON position.
To Next Page
Loading...
Need help?
General
