EasyManuals Logo

Zebra TC75 User Manual

Zebra TC75
225 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #212 background imageLoading...
Page #212 background image
8 - 4 TC75 User Guide
Connector Cleaning
To clean the connectors:
1. Remove the main battery from mobile computer.
2. Dip the cotton portion of the cotton-tipped applicator in isopropyl alcohol.
3. Rub the cotton portion of the cotton-tipped applicator back-and-forth across the connector. Do not leave any
cotton residue on the connector.
4. Repeat at least three times.
5. Use the cotton-tipped applicator dipped in alcohol to remove any grease and dirt near the connector area.
6. Use a dry cotton-tipped applicator and repeat steps 4 through 6.
7. Spray compressed air on the connector area by pointing the tube/nozzle about ½ inch away from the surface.
8. Inspect the area for any grease or dirt, repeat if required.
Cleaning Cradle Connectors
To clean the connectors on a cradle:
1. Remove the DC power cable from the cradle.
2. Dip the cotton portion of the cotton-tipped applicator in isopropyl alcohol.
3. Rub the cotton portion of the cotton-tipped applicator along the pins of the connector. Slowly move the
applicator back-and-forth from one side of the connector to the other. Do not leave any cotton residue on the
connector.
4. All sides of the connector should also be rubbed with the cotton-tipped applicator.
5. Spray compressed air in the connector area by pointing the tube/nozzle about ½ inch away from the surface.
6. Remove any lint left by the cotton-tipped applicator.
7. If grease and other dirt can be found on other areas of the cradle, use a lint-free cloth and alcohol to remove.
8. Allow at least 10 to 30 minutes (depending on ambient temperature and humidity) for the alcohol to air dry
before applying power to cradle.
If the temperature is low and humidity is high, longer drying time is required. Warm temperature and dry
humidity requires less drying time.
CAUTION Do not point nozzle at yourself and others, ensure the nozzle or tube is away from your face.
CAUTION Do not point nozzle at yourself and others, ensure the nozzle or tube is pointed away from your face.

Table of Contents

Other manuals for Zebra TC75

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra TC75 and is the answer not in the manual?

Zebra TC75 Specifications

General IconGeneral
Display Size4.7 inches
Resolution1280 x 720 pixels
Operating SystemAndroid
Battery Capacity4620 mAh
Cellular Connectivity4G LTE
GPSYes
Humidity5% to 95% non-condensing
Camera8 MP rear camera
Wireless ConnectivityWi-Fi 802.11 a/b/g/n
RuggednessMIL-STD-810G
Operating Temperature-20° C to 50° C
Barcode Scanner1D/2D imager
RAM1 GB
Storage8 GB
Expandable Storageup to 32 GB microSD
Dimensions6.3 x 3.3 x 1.1 inches

Related product manuals