6 - 22 TC75 User Guide
Enabling NFC
1. Touch > .
2. Touch More.
3. Slide the NFC switch to the ON position.
4. Touch .
Disabling NFC
1. Touch > .
2. Touch More.
3. Slide the NFC switch to the OFF position.
4. Touch .
Reading NFC Cards
1. Launch an NFC enabled application.
2. Hold device as shown.
Figure 6-14 Reading Cards
3. Move TC75 close to the NFC card until the TC75 detects the card.
4. Hold the card steadily until the transaction is complete (usually indicated by the application).
NOTE NFC is enabled by default in TC75 configurations with GMS.
To Next Page
Loading...