Wireless 6 - 11
•
If required, in the Password text box, enter the password for then given identity.
9. Touch Connect.
10. Touch .
Manually Adding a Wi-Fi Network
Manually add a Wi-Fi network if the network does not broadcast its name (SSID) or to add a Wi-Fi network when
out of range.
1. Touch > .
2. Touch Wi-Fi.
3. Slide the Wi-Fi switch to the On position.
4. Touch > Add network.
5. In the Network name text box, enter the name of the Wi-Fi network.
6. In the Security drop-down list, select the type of security. Options:
•
None
•
WEP
•
WPA/WPA2 PSK
•
802.1x EAP.
7. If the network security is None, touch Save.
8. If the network security is WEP or WPA/WPA2 PSK, enter the required password and then touch Save.
9. If the network security is 802.1x EAP:
•
Touch the EAP method drop-down list and select PEAP, TLS, TTLS, LEAP or FAST.
•
Touch the Phase 2 authentication drop-down list and select an authentication method.
•
If required, touch CA certificate and select a Certification Authority (CA) certificate. Note: Certificates are
installed using the Security settings.
•
If required, touch User certificate and select a user certificate. Note: User certificates are installed using
the Security settings.
•
If required, in the Identity text box, enter the username credentials.
•
If desired, in the Anonymous identity text box, enter an anonymous identity username.
•
If required, in the Password text box, enter the password for then given identity.
10. Touch Save. To connect to the saved network, touch the saved network and select CONNECT.
11. Touch .
NOTE By default, the network Proxy is set to None and the IP settings is set to DHCP. See Configuring for a
Proxy Server on page 6-12 for setting connection to a proxy server and see Configuring the Device to Use
a Static IP Address on page 6-12 for setting the device to use a static IP address.
NOTE By default, the network Proxy is set to None and the IP settings is set to DHCP. See Configuring for a
Proxy Server on page 6-12 for setting connection to a proxy server and see Configuring the Device to Use
a Static IP Address on page 6-12 for setting the device to use a static IP address.
To Next Page
Loading...
Need help?
General
