Name: Zebra TC75
Brand: Zebra
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Wireless 6 - 9

Figure 6-5 Wi-Fi Screen

4. Scroll through the list and select the desired WLAN network.

5. For open networks, touch profile once or press and hold and then select Connect to network or for secure

networks enter the required password or other credentials then touch Connect. See the system administrator

for more information.

The TC75 obtains a network address and other required information from the network using the dynamic host

configuration protocol (DHCP) protocol. To configure the TC75 with a fixed internet protocol (IP) address, See

Configuring the Device to Use a Static IP Address on page 6-12.

6. In the Wi-Fi setting field, Connected appears indicating that the TC75 is connected to the WLAN.

Configuring a Wi-Fi Network

To set up a Wi-Fi network:

1. Touch > .

2. Touch Wi-Fi.

3. Slide the switch to the ON position.

4. The device searches for WLANs in the area and lists them on the screen.

5. Scroll through the list and select the desired WLAN network.

6. Touch the desired network. If the network security is Open, the device automatically connects to the network.

For all other network security a dialog box appears.

Zebra TC75 Specifications

General

Zebra TC75 User Manual

Other manuals for Zebra TC75