Calls 3 - 15
General settings
•
Contact display options
• Sort by - Touch to sort contacts by first or last name.
• Name format - Touch to list contacts
•
Sounds and vibrate
• Phone ringtone - Touch to select a ringtone to sound when an incoming call is received.
• Dialpad tones - Check to play a sound when a phone key is touched.
• Also vibrate for calls - Check to make the device vibrate when a call is received.
•
Other
• Quick responses - Touch to edit quick responses to use instead of answering a call.
Call settings
•
Phone Account Settings
• SIP accounts
• Use SIP calling
• For all calls
• Only for SIP calls
• Receive incoming calls
•
Voicemail - Touch to configure voicemail settings.
• Service - Set the service provider or other provider for voicemail service.
•Setup - Touch to update the phone number used to access voicemail.
• Sound - Touch to select a sound to play when a voicemail is received.
•Vibrate - Set vibrate option. (default – disabled).
•
Fixed Dialing Numbers - Use Fixed Dialing to restrict the phone to dial only the phone number(s) or area
code(s) specified in a Fixed Dialing list.
•
TTY mode - Touch to set the TTY setting. Use an optional teletypewriter (TTY) device with the TC75 to send
and receive calls. Plug the TTY device into the TC75 headset jack and set the TC75 to operate in one of the
TTY modes.
Set the TC75 volume to a middle level setting for proper operation. If you experience a high number of incorrect
characters, adjust the volume as needed to minimize the error rate.
For optimal performance, the TC75 should be at least 30 cm (12 inches) from the TTY device. Placing the TC75 too
close to the TTY device may cause high error rates.
• TTY off (default) - TTY is off.
• TTY Full - Transmit and receive TTY characters.
• TTY HCO - Transmit TTY characters but receive by listening to earpiece.
• TTY VCO - Receive TTY characters but transmit by speaking into microphone.
• DTMF tones - Touch to set the length of the DTMF tones. Options: Normal (default) or Long.
NOTE Use a TSB-121 compliant cable (provided by the TTY manufacturer) to connect the TTY device to the
TC75.