To Next Page

To Previous Page

4 - 14 TC75 User Guide

•

• Scene mode - Touch to select a preset combination of camera settings designed for specific scenes.

Options: Auto (default), Night, Portrait, Landscape, Steady Photo, Sports or Document capture.

• Store location – Touch to add location information to the photo. (default – disabled)

• Picture size - Touch to set the size (in pixels) of the photo. Options: 8M pixels (default), 5M pixels, 3M

pixels, HD 1080p, 2M pixels, HD 720p, 1M pixels, WVGA, VGA or QVGA.

• Picture quality - Touch to select picture quality setting. Options: Super fine (default), Fine or Normal.

•ZSL - Set the camera to immediately take a picture when the button is pressed (default – disabled)

• Countdown timer - Options: Off (default), 1 second, 2 seconds, 3 seconds, 4 seconds, 5 seconds, 10

seconds, 15 seconds, 20 seconds, 30 seconds or 60 seconds.

• Beep during countdown - Select to play a beep tone during countdown (default – enabled).

•Storage Position - Touch to select the storage location. Options: Phone or SD Card (default).

• Auto HDR - Touch to enable High Dynamic Range photography (default - disabled).

•

• Face detection - Select to enable face detection (default – enabled).

• Touch AF/AEC - Select to enable auto focus (default – enabled).

• Sharpness - Touch to select a sharpness level. Options: Level 0, Level 1, Level 2, Level 3 (default),

Level 4, Level 5 or Level 6.

• Select Auto Exposure - Touch to select auto exposure setting. Options: Frame Average (default),

Center Weighted or Spot Metering.

•

• Anti Banding - Options: Off, 50 Hz, 60 Hz or Auto (default).

•Select ISO - Set how sensitive the camera is to light. Options: Auto (default), ISO Auto (HJR), ISO100,

ISO200, ISO400, ISO800 or ISO1600.

• Exposure - Touch to adjust the exposure settings. Options: +2, +1, 0(default), -1 or -2.

• White balance - Touch to select how Camera adjusts colors in different kinds of light, to achieve the most

natural-looking colors.

• Incandescent - Adjust the white balance for incandescent lighting.

• Fluorescent - Adjust the white balance for florescent lighting.

• Auto - Adjust the white balance automatically (default).

• Daylight - Adjust the white balance for daylight.

• Cloudy - Adjust the white balance for a cloudy environment.

• Flash mode - Touch to set whether Rear-facing Camera relies on its light meter to decide whether a flash

is necessary, or to turn it on or off for all shots.

• Off - Disable flash.

• Auto - Camera adjusts flash automatically depending upon light meter (default).

• On - Enable flash upon taking a photo.

Zebra TC75 User Manual

Other manuals for Zebra TC75