Legal Notices
Stratus OCT User Manual PN 2660021134133 A
12-6
full force and effect. You agree that the Software will not be shipped, transferred or
exported into any country or used in any manner prohibited by the United States Export
Administration Act or any other export laws, restrictions or regulations. This Agreement
shall automatically terminate upon failure by you to comply with its terms. This Agreement
may only be modified in writing signed by an authorized officer of Carl Zeiss Meditec, Inc.
This is the entire agreement between ZEISS and You relating to the Software and the
Documentation and it supersedes any prior representations, discussions, undertakings, end
user license agreements, communications or advertising relating to the Software and the
Documentation.
6. Notice to United States Government End Users. The Software and Documentation are
"Commercial Items," as that term is defined at 48 C.F.R. §2.101, consisting of "Commercial
Computer Software" and "Commercial Computer Software Documentation," as such terms
are used in 48 C.F.R. §12.212 or 48 C.F.R. §227.7202, as applicable. Consistent with 48
C.F.R. §12.212 or 48 C.F.R. §§227.7202-1 through 227.7202-4, as applicable, the
"Commercial Computer Software" and "Commercial Computer Software Documentation"
are being licensed to U.S. Government end users (i) only as "Commercial Items" and (ii)
with only those rights as are granted to all other end users pursuant to the terms and
conditions herein.
Unpublished-rights reserved under the copyright laws of the United States.
Carl Zeiss Meditec, Inc., 5160 Hacienda Drive; Dublin, CA, USA.
For Your future reference a copy of this End User License Agreement will be accessible after
You install the Software. If You have any questions regarding this Agreement or if you wish
to request any information from ZEISS, please use the address information enclosed in this
product to contact the local Carl Zeiss Meditec office serving your country or write to
Customer Support Department, Carl Zeiss Meditec, Inc., 5160 Hacienda Drive, Dublin, CA
94568.
STRATUS(r) is a registered trademark of Carl Zeiss Meditec, Inc. Windows is a registered
trademark of Microsoft Corporation.
By use of the Software, You acknowledge that You have read this license agreement and
limited warranty, understand them, and agree to be bound by their terms and conditions.
Carl Zeiss Meditec, Inc., Limited Warranty for Software
Defined Terms:
“You”, “Your”, or “Licensee”: Buyer
ZEISS: Carl Zeiss Meditec, Inc., 5160 Hacienda Drive, Dublin, CA 94568 USA
Software: Software made by Carl Zeiss Meditec, Inc.
3rd Party Products: Products, hardware and software supplied by ZEISS but not made by
ZEISS.
Outside Elements: Hardware or software that ZEISS has not supplied, authorized or
confirmed for use in Buyer’s Site Survey.
To Next Page
