Zeiss 3000 - Password Protection

Introduction
Stratus OCT User Manual PN 2660021134133 A
1-18
Password Protection

Note: The following information and instructions are intended for the use of the
Stratus OCT in a standalone setting. If you have installed the Stratus OCT in a
network environment, we assume that you will apply your own user account
management procedures. We do not offer recommendations or instructions for
password protection in a network environment. In general, we recommend that you
use good practices in creating, administering and securing passwords.
It is the user’s responsibility to impl
ement whatever instrument and data security measures
are desired or appropriate. This section instructs you how to use the Windows operating
system to require users to enter a password before they can access the Stratus OCT
computer. The Stratus OCT is shipped with Windows password protection turned on but
with auto-logon enabled so that users do not have to enter a password. The result is that,
upon system startup, any user has administrator privileges (access to all functions) via the
default user account.

Note: If you disable auto-logon, the Stratus OCT software will not launch
automatically upon system startup. You will be required to log on to the computer
by entering a valid user name and password combination. After logging on, you
may have to launch the Stratus OCT software by double-clicking on the STRATUS
OCT Host desktop icon.
Administrator Privileges
Administrators belong to the Administrators Group by default. The default user account is
an administrator account.
•Users in the Ad
ministrators Group can use all Stratus OCT functions.
• Administrators can modify the compute
r and install programs—and thereby
implement Stratus OCT software upgrades.
• Only administr
ators can create new user accounts, manage network settings and read
the files of other users.
Default Windows User Name, Password and Workgroup Name
Stratus OCT systems that ship
ped with software version 5.0 or later have a different default
user name, password and workgroup name than systems that shipped with any earlier
software version. Passwords are case-sensitive.
Stratus OCT shipped with Version 6.0 or later Stratus OCT shipped before Version 6.0
User Name Zeiss Administrator
Password November171846 tomography
Workgroup Name CZM Workgroup