Stratus OCT User Manual PN 2660021134133 A
Acquire Scans
3-3
Initiate a Scan
To position the patient module for scanning, you must initiate a scan. First, select a scan
acquisition protocol using the Scan Tab, below.
Figure 3-2 The Scan Tab in Stratus OCT Main Window
• If not in the MAIN WINDOW, click the Go to Scan Acquisition button to display it, as
pictured at left. If necessary, click the Scan Tab to bring it to the
front.
Note: The Repeat Scan function is explained on page 4-11.
•From the M
AIN WINDOW, select a scan acquisition protocol from the Scan Tab. You
can either click the protocol and then click the New Scan button at the bottom, or
To Next Page
Loading...
