Configuration
LITECOM, Commissioning and maintenance instructions 17.0 | 04.2024 | en 149
Deleting or removing linked devices
Devices physically connected to a LITECOM CCD can only be deleted there. If linked devices are deleted on the
original LITECOM CCD, they are also deleted on the linked LITECOM CCD.
Linked devices can be removed on the linked LITECOM CCD. When a device is removed, the device is only
removed from the link and remains on the original LITECOM CCD. If an entire LITECOM CCD control device is
removed from the link, all linked devices for this LITECOM CCD control device are automatically removed from the
system image.
For more information see Section System image
Note
In an Infinity system, linked devices can only be removed on the LITECOM CCD on which the link
was created.
47
To Next Page
Loading...