Configuration
LITECOM, Commissioning and maintenance instructions 17.0 | 04.2024 | en 80
Group or device controlled with the right rocker key.
Mode of operation (right rocker key)
(only when right rocker key controls a group)
Mode of operation controlled with the right rocker key.
Reverse operation of right rocker key
The function of the right rocker key is reversed with this setting. This is
recommended in the event of incorrect wiring, for example.
On/off key – additional settings
On/off key (last selected scene > Absence
scene)
This setting defines that each press of the on/off key recalls the last scene
selected and the absence scene alternately.
Red LED of the on/off key active
This setting defines whether the red LED of the on/off key is active. In
hotels, for example, it is sensible to deactivate the red LED so that the
guests are not disturbed during the night by the red light.
Table 28: Configuration options – CIRCLE control unit
LM-CIRIA
The following table provides a description of the individual configuration options:
Scene, which the user recalls using the on/off key when exiting the room.
Mode of operation (presence scene)
Mode of operation controlled when the presence scene is recalled.
Fade time to presence scene
Time during which the absence scene changes to a value (scene, presence
value).
Scene, which the user recalls using the on/off key when entering the room.
Mode of operation (absence scene)
Mode of operation controlled when the absence scene is recalled.
Fade time to absence scene
The time it takes to change from one value (scene, presence value) to the
absence scene.
Mode of operation (dimming)
Mode of operation controlled during dimming/brightening.
Table 29: Configuration options – LM-CIRIA
To Next Page
Loading...