MES3500 Series User’s Guide
137
CHAPTER 15
Broadcast Storm Control
This chapter introduces and shows you how to configure the broadcast storm control feature.
15.1 Broadcast Storm Control Setup
Broadcast storm control limits the number of broadcast, multicast and destination lookup failure
(DLF) packets the Switch receives per second on the ports. When the maximum number of
allowable broadcast, multicast and/or DLF packets is reached per second, the subsequent packets
are discarded. Enable this feature to reduce broadcast, multicast and/or DLF packets in your
network. You can specify limits for each packet type on each port.
Click Advanced Application > Broadcast Storm Control in the navigation panel to display the
screen as shown next.
Figure 71 Advanced Application > Broadcast Storm Control
To Next Page
Loading...
