ZyXEL Communications MES3500 Series - Maintenance; The Maintenance Screen

MES3500 Series User’s Guide
294
CHAPTER 39
Maintenance
This chapter explains how to configure the screens that let you maintain the firmware and
configuration files.
39.1 The Maintenance Screen
Use this screen to manage firmware and your configuration files. Click Management >
Maintenance in the navigation panel to open the following screen.
Figure 187 Management > Maintenance
The following table describes the labels in this screen.
Table 137 Management > Maintenance
LABEL DESCRIPTION
Current This field displays which configuration (Configuration 1 or Configuration 2) is currently
operating on the Switch.
Firmware
Upgrade
Click Click Here to go to the Firmware Upgrade screen.
Restore
Configuration
Click Click Here to go to the Restore Configuration screen.
Backup
Configuration
Click Click Here to go to the Backup Configuration screen.
Load Factory
Default
Click Click Here to reset the configuration to the factory default settings.
Save
Configuration
Click Config 1 to save the current configuration settings to Configuration 1 on the Switch.
Click Config 2 to save the current configuration settings to Configuration 2 on the Switch.
Reboot
System
Click Click Here to go to the Reboot System screen.
Tech-Support Click Click Here to see the Tech-Support screen. You can set CPU and memory thresholds
for log reports and download related log reports for issue analysis. Log reports include CPU
history and utilization, crash and memory.