ZyXEL Communications MES3500 Series User Manual

Chapter 26 AAA
MES3500 Series User’s Guide
213
Refer to RFC 2865 for more information about RADIUS attributes used for authentication. Refer to
RFC 2866 and RFC 2869 for RADIUS attributes used for accounting.
This section lists the attributes used by authentication and accounting functions on the Switch. In
cases where the attribute has a specific format associated with it, the format is specified.
26.3.1 Attributes Used for Authentication
The following sections list the attributes sent from the Switch to the RADIUS server when
performing authentication.
26.3.1.1 Attributes Used for Authenticating Privilege Access
User-Name
- the format of the User-Name attribute is $enab#$, where # is the privilege level (1-14)
User-Password
NAS-Identifier
NAS-IP-Address
26.3.1.2 Attributes Used to Login Users
User-Name
User-Password
NAS-Identifier
NAS-IP-Address
26.3.1.3 Attributes Used by the IEEE 802.1x Authentication
User-Name
NAS-Identifier
NAS-IP-Address
NAS-Port
NAS-Port-Type
- This value is set to Ethernet(15) on the Switch.
Calling-Station-Id
Frame-MTU
EAP-Message
State
Message-Authenticator
26.3.2 Attributes Used for Accounting
The following sections list the attributes sent from the Switch to the RADIUS server when
performing authentication.

ZyXEL Communications MES3500 Series Specifications

General

Brand	ZyXEL Communications
Model	MES3500 Series
Category	Network Router
Language	English