MES3500 Series User’s Guide
77
CHAPTER 8
Basic Setting
This chapter describes how to configure the Basic Setting screens.
8.1 System Information
In the navigation panel, click Basic Setting > System Info to display the screen as shown. You
can check the firmware version number and monitor the Switch temperature and voltage in this
screen.
Figure 30 Basic Setting > System Info
The following table describes the labels in this screen.
Table 11 Basic Setting > System Info
LABEL DESCRIPTION
System Name This field displays the descriptive name of the Switch for identification purposes.
Product Model This field displays the model number of the Switch.
ZyNOS F/W
Version
This field displays the version number of the Switch 's current firmware including the date
created.
Ethernet
Address
This field refers to the Ethernet MAC (Media Access Control) address of the Switch.
Hardware Monitor
Temperature
Unit
The Switch has temperature sensors that are capable of detecting and reporting if the
temperature rises above the threshold. You may choose the temperature unit (Centigrade or
Fahrenheit) in this field.
To Next Page
Loading...
Need help?
General
