Chapter 22 Policy Rule
MES3500 Series User’s Guide
177
Figure 97 Advanced Application > Policy Rule: Summary Table
The following table describes the labels in this screen.
22.4 Policy Example
The figure below shows an example Policy screen where you configure a policy to limit bandwidth
on a traffic flow classified using the Example classifier (refer to Section 21.4 on page 172).
Table 64 Policy: Summary Table
LABEL DESCRIPTION
Rule Usage This field displays how many rules have been configured on the Switch.
Index This field displays the policy index number. Click an index number to edit the policy.
Active This field displays Yes when policy is activated and No when is it deactivated.
Name This field displays the name you have assigned to this policy.
Classifier(s) This field displays the name(s) of the classifier to which this policy applies.
Delete Click Delete to remove the selected entry from the summary table.
Cancel Click Cancel to clear the Delete check boxes.
To Next Page
Loading...
