Chapter 37 DHCP
MES3500 Series User’s Guide
288
37.5.2 DHCPv6 Port Configure
Use this screen to apply a different DHCPv6 options profile to certain ports in a VLAN. To open this
screen, click IP Application > DHCP > DHCPv6 > Port.
Figure 185 IP Application > DHCP > DHCPv6 > Port
The following table describes the labels in this screen.
Add Click this to create a new entry or to update an existing one.
This saves your changes to the Switch’s run-time memory. The Switch loses these changes if
it is turned off or loses power, so use the Save link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to reset the fields to their last saved values.
Profile Name This field displays the descriptive name of the profile. Click the name to change the settings.
Option18 This field displays whether the Interface-ID option is added to client DHCP requests.
Option37 This field displays the information that is included in the Remote-ID option.
Option38 This field displays the information that is included in the Subscriber-ID option.
Referenced This field displays whether this profile is in use by a feature, such as DHCPv6 relay.
Delete Check the entry(ies) that you want to remove in the Delete column and then click the
Delete button.
Cancel Click Cancel to clear the selected checkbox(es) in the Delete column.
Table 134 IP Application > DHCP > DHCPv6 > Options Profile (continued)
LABEL DESCRIPTION
Table 135 IP Application > DHCP > DHCPv6 > Port
LABEL DESCRIPTION
VID Enter the ID number of the VLAN you want to configure here.
Port Enter the number of port(s) to which you want to apply the specified DHCPv6 options
profile.
You can enter multiple ports separated by (no space) comma (,) or hyphen (-). For
example, enter “3-5” for ports 3, 4, and 5. Enter “3,5,7” for ports 3, 5, and 7.
Options Profile Select a pre-defined DHCPv6 options profile that the Switch applies to the specified port(s)
in this VLAN.
The profile you select here has priority over the one you select in the DHCP > DHCPv6
screen.
To Next Page
Loading...
