Chapter 20 Range Profile
MES3500 Series User’s Guide
167
Figure 92 Advanced Application > Range Profile > Socket-port Range
The following table describes the labels in this screen.
Table 58 Advanced Application > Range Profile > Socket-port Range
LABEL DESCRIPTION
Name Enter a descriptive name for this profile for identifying purposes.
Type Select to specify the source or destination socket port numbers.
IP Address Enter the first and last socket port numbers to specify a range of socket port numbers.
Add Click Add to save your changes to the Switch’s run-time memory. The Switch loses this
change if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Index This field displays the index number of the profile. Click an index number to change the
settings.
Name This field displays the descriptive name for this profile.
Type This field displays the type of the socket ports in this profile.
Socket-Port This field displays the range of socket ports defined in this profile.
Referenced This field displays whether this profile is in use by a feature, such as classifier.
Delete Check the profile(s) that you want to remove in the Delete column and then click the
Delete button.
Cancel Click Cancel to begin configuring this screen afresh.
To Next Page
Loading...
