Chapter 24 VLAN Stacking
MES3500 Series User’s Guide
188
Active This shows whether this rule is activated or not.
Name This is the descriptive name for this rule.
Port This is the port number to which this rule is applied.
CVID This is the customer VLAN ID in the incoming packets.
SPVID This is the service provider’s VLAN ID that adds to the packets from the subscribers.
Priority This is the service provider’s priority level in the packets.
Delete Check the rule(s) that you want to remove in the Delete column and then click the Delete button.
Cancel Click Cancel to clear the Delete check boxes.
Table 71 Advanced Application > VLAN Stacking > Selective QinQ (continued)
LABEL DESCRIPTION
To Next Page
Loading...
