Chapter 25 Multicast
MES3500 Series User’s Guide
201
News and Movie channels) from the remote streaming media server, S. Computers A, B and C in
VLAN 1 are able to receive the traffic.
Figure 112 MVR Configuration Example
To configure the MVR settings on the Switch, create a multicast group in the MVR screen and set
the receiver and source ports.
Figure 113 MVR Configuration Example
To set the Switch to forward the multicast group traffic to the subscribers, configure multicast group
settings in the Group Configuration screen. The following figure shows an example where two
multicast groups (News and Movie) are configured for the multicast VLAN 200.
S
Multicast VID 200
VLAN 1
A
B
C
News: 224.1.4.10 ~ 224.1.4.50
1
Movie: 230.1.2.50 ~230.1.2.60
2
3
7
To Next Page
Loading...
