Chapter 44 MAC Table
MES3500 Series User’s Guide
338
Transfer Type Select Dynamic to MAC forwarding and click the Transfer button to change all
dynamically learned MAC address entries in the summary table below into static entries.
They also display in the Static MAC Forwarding screen.
Select Dynamic to MAC filtering and click the Transfer button to change all dynamically
learned MAC address entries in the summary table below into MAC filtering entries. These
entries will then display only in the Filtering screen and the default filtering action is
Discard source.
Cancel Click Cancel to change the fields back to their last saved values.
Index This is the incoming frame index number.
MAC Address This is the MAC address of the device from which this incoming frame came.
VID This is the VLAN group to which this frame belongs.
Port This is the port where the above MAC address is forwarded.
Type This shows whether the MAC address is dynamic (learned by the Switch) or static
(manually entered in the Static MAC Forwarding screen).
Table 163 Management > MAC Table (continued)
LABEL DESCRIPTION
To Next Page
Loading...
