ZyXEL Communications P-792H - Firewall Rule Setup Example

Chapter 9 Firewalls
P-792H v2 User’s Guide
119
9.1.3 Firewall Rule Setup Example
The following Internet firewall rule example allows a hypothetical “MyService”
connection from the Internet.
1 Click Security > Firewall > Rules.
2 Select WAN to LAN in the Packet Direction field.
Firewall Example: Rules
3 In the Rules screen, select the index number after that you want to add the rule.
For example, if you select “6”, your new rule becomes number 7 and the previous
rule 7 (if there is one) becomes rule 8.
4 Click Add to display the firewall rule configuration screen.
5 In the Edit Rule screen, click the Edit Customized Services link to open the
Customized Service screen.
6 Click an index number to display the Customized Services Config screen and
configure the screen as follows and click Apply.
Edit Custom Port Example
7 Select Any in the Destination Address List box and then click Delete.