ZyXEL Communications P-792H - The Dynamic DNS Screen

Chapter 16 Dynamic DNS Setup
P-792H v2 User’s Guide
220
16.2 The Dynamic DNS Screen
Use this screen to change your P-792H v2’s DDNS. Click Advanced > Dynamic
DNS. The screen appears as shown.
Figure 101 Advanced > Dynamic DNS
The following table describes the fields in this screen.
Table 68 Advanced > Dynamic DNS
LABEL DESCRIPTION
Dynamic DNS Setup
Active
Dynamic DNS
Select this check box to use dynamic DNS.
Service
Provider
This is the name of your Dynamic DNS service provider.
Dynamic DNS
Type
Select the type of service that you are registered for from your Dynamic
DNS service provider.
Host Name Type the domain name assigned to your P-792H v2 by your Dynamic
DNS provider.
You can specify up to two host names in the field separated by a comma
(",").
User Name Type your user name.
Password Type the password assigned to you.
Enable
Wildcard
Option
Select the check box to enable DynDNS Wildcard.