ZyXEL Communications P-792H - The Log Settings Screen

Chapter 20 Logs
P-792H v2 User’s Guide
255
20.3 The Log Settings Screen
Use the Log Settings screen to configure the mail server, the syslog server, when
to send logs and what logs to send.
To change your P-792H v2’s log settings, click Maintenance > Logs > Log
Settings. The screen appears as shown.
Alerts are e-mailed as soon as they happen. Logs may be e-mailed as soon as the
log is full. Selecting many alert and/or log categories (especially Access Control)
may result in many e-mails being sent.
Figure 114 Maintenance > Logs > Log Settings
Destination This field lists the destination IP address and the port number of the
incoming packet.
Notes This field displays additional information about the log entry.
Table 79 Maintenance > Logs > View Log
LABEL DESCRIPTION