P-792H v2 User’s Guide
53
CHAPTER 5
Tutorial
5.1 Overview
This chapter describes:
• Configuring Point-to-point Connection, see page 53
Note: The tutorials featured in this chapter require a basic understanding of
connecting to and using the Web Configurator on your P-792H v2. For details,
see the included Quick Start Guide. For field descriptions of individual screens,
see the related technical reference in this User's Guide.
5.2 Configuring Point-to-point Connection
In this scenario, Company A wants to set up a point-to-point connection with its
branch office B by using two P-792H v2s. The two P-792H v2s are directly
connected together through their DSL ports. The P-792H v2 on A’s side is the
server and the P-792H v2 on B’s side is the client. The maximum transfer rate for
the DSL connection between A and B is 5696 Kbps and the minimum transfer rate
is 3200 Kbps.
To set up the point-to-point connection between A and B, you need to:
1 Set Up the Server.
2 Set Up the Client.
A
B
5696/3200 Kpbs
To Next Page
Loading...
