ZyXEL Communications P-792H - Schedule Set Setup

Chapter 37 Schedule Setup
P-792H v2 User’s Guide
394
The following table describes the labels in this menu.
37.3 Schedule Set Setup
This menu is only applicable if your Internet connection uses PPPoE encapsulation.
Use this menu to configure the schedule sets in the P-792H v2. To open this menu,
enter the number of the schedule set in the Enter Schedule Set Number to
Configure field, enter the name of the schedule set in the Edit Name field, and
press [ENTER] in menu 26.
Figure 225 Menu 26.1: Schedule Set Setup
Table 141 Menu 26: Schedule Setup
FIELD DESCRIPTION
1-12 This field shows the beginning of the name of each schedule set.
Lower numbered sets take precedence over higher numbered sets.
This avoids scheduling conflicts. For example, if sets 1, 2, 3 and 4 in
are applied in the remote node, then set 1 takes precedence over set
2, 3 and 4.
Enter Schedule Set
Number to
Configure
If you want to configure a schedule set, enter the number of the
static route in this field, enter the name in the Edit Name field, and
press [ENTER]. Menu 26.1 appears.
If you want to delete a schedule set, enter the number of the static
route in this field, leave the name blank in the Edit Name field, and
press [ENTER].
Edit Name Enter the name of the schedule set you want to configure, or leave
this field blank to delete the specified schedule set.
Menu 26.1 Schedule Set Setup
Active= Yes
Start Date(yyyy-mm-dd)= 2000 - 01 - 01
How Often= Once
Once:
Date(yyyy-mm-dd)= 2000 - 01 - 01
Weekdays:
Sunday= N/A
Monday= N/A
Tuesday= N/A
Wednesday= N/A
Thursday= N/A
Friday= N/A
Saturday= N/A
Start Time(hh:mm)= 00 : 00
Duration(hh:mm)= 00 : 00
Action= Forced On