P-792H v2 User’s Guide
223
CHAPTER 17
Remote Management
17.1 Overview
Remote management allows you to determine which services/protocols can access
which P-792H v2 interface (if any) from which computers.
The following figure shows remote management of the P-792H v2 coming in from
the WAN.
Figure 102 Remote Management From the WAN
Note: When you configure remote management to allow management from the WAN,
you still need to configure a firewall rule to allow access.
You may manage your P-792H v2 from a remote location via:
•Internet (WAN only)
•LAN only
•ALL (WAN and LAN)
• None (Disable)
LAN
WAN
HTTP
Telnet
To Next Page
Loading...
