Chapter 14 802.1Q/1P
P-792H v2 User’s Guide
198
14.2.1 Editing 802.1Q/1P Group Setting
Use this screen to configure the settings for each VLAN group.
In the 802.1Q/1P screen, click the Edit button from the Modify filed to display
the following screen.
Figure 90 Advanced > 802.1Q/1P > Group Setting > Edit
The following table describes the labels in this screen.
Port Number These columns display the VLAN’s settings for each port. A tagged
port is marked as T, an untagged port is marked as U and ports not
participating in a VLAN are marked as “–“.
Modify Click the Edit button to configure the ports in the VLAN group.
Click the Remove button to delete the VLAN group.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Table 59 Advanced > 802.1Q/1P > Group Setting (continued)
LABEL DESCRIPTION
Table 60 Advanced > 802.1Q/1P > Group Setting > Edit
LABEL DESCRIPTION
Name Enter a descriptive name for the VLAN group for identification purposes.
The text may consist of up to 8 letters, numerals, “-”, “_” and “@”.
VLAN ID Assign a VLAN ID for the VLAN group. The valid VID range is between 1
and 4094.
To Next Page
Loading...
