Chapter 23 Introducing the SMT
P-792H v2 User’s Guide
289
23.3 Navigating the SMT Interface
You should be familiar with the following operations before you try to use the SMT
to modify the configuration.
Table 107 Main Menu Commands
OPERATION KEYSTROKE DESCRIPTION
Move down to
another menu
[ENTER] To move forward to a submenu, type in the
number of the desired submenu and press
[ENTER].
Move up to a
previous menu
[ESC] Press [ESC] to move back to the previous menu.
Move to a
“hidden” menu
Press [SPACE
BAR] to change
No to Yes then
press [ENTER].
Fields beginning with “Edit” lead to hidden menus
and have a default setting of No. Press [SPACE
BAR] once to change No to Yes, then press
[ENTER] to go to the “hidden” menu.
Move the cursor [ENTER] or [UP]/
[DOWN] arrow
keys.
Within a menu, press [ENTER] to move to the next
field. You can also use the [UP]/[DOWN] arrow
keys to move to the previous and the next field,
respectively.
Entering
information
Type in or press
[SPACE BAR],
then press
[ENTER].
You need to fill in two types of fields. The first
requires you to type in the appropriate
information. The second allows you to cycle
through the available choices by pressing [SPACE
BAR].
Required fields <?> or
ChangeMe
All fields with the symbol <?> must be filled in
order to be able to save the new configuration.
All fields with ChangeMe must not be left blank in
order to be able to save the new configuration.
N/A fields <N/A> Some of the fields in the SMT will show a <N/A>.
This symbol refers to an option that is Not
Applicable.
Save your
configuration
[ENTER] Save your configuration by pressing [ENTER] at
the message “Press ENTER to confirm or ESC to
cancel”. Saving the data on the screen will take
you, in most cases to the previous menu.
Exit the SMT Type 99, then
press [ENTER].
Type 99 at the main menu prompt and press
[ENTER] to exit the SMT interface.
To Next Page
Loading...
