Chapter 6 WAN Setup
P-792H v2 User’s Guide
70
6.3.1 More Connections Edit
Use this screen to configure a connection. Click the edit icon in the More
Connections screen to display the following screen.
Figure 27 Network > WAN > More Connections: Edit
The following table describes the labels in this screen.
Table 15 Network > WAN > More Connections: Edit
LABEL DESCRIPTION
General
Active Select the check box to activate or clear the check box to
deactivate this connection.
Name Enter a unique, descriptive name of up to 13 ASCII characters for
this connection.
Mode Select Routing from the drop-down list box if your ISP allows
multiple computers to share an Internet account.
If you select Bridge, the P-792H v2 will forward any packet that
it does not route to this remote node; otherwise, the packets are
discarded.
To Next Page
Loading...
