Chapter 10 Content Filtering
P-792H v2 User’s Guide
140
10.1.4 Content Filtering Example
The following shows the steps required for a parent (Bob) to set up content
filtering on a home network in order to limit his children’s access to certain web
sites. In the following example, all URLs containing the word ‘bad’ are blocked.
1 Click Security > Content Filter to display the following screen.
2 Select Active Keyword Blocking.
3 In the Keyword field type keywords to identify websites to be blocked.
4 Click Add Keyword for each keyword to be entered.
5 Click Apply.
Security > Content Filter > Keyword: Example
Bob’s son arrives home from school at four, while his parents arrive later, at about
7pm. So keyword blocking is enabled for these times on weekdays and not on the
weekend when the parents are at home.
1 Click Security > Content Filter > Schedule.
2 Click Edit Daily to Block and select all weekdays.
3 Under Start Time and End Time, type the times for blocking to begin and end
(16:00 ~ 17:00 in this example).
To Next Page
Loading...
