ZyXEL Communications P-792H - High-Speed Point-To-Point Connections; Ways to Manage the P-792 H V2

Chapter 1 Getting To Know Your P-792H v2
P-792H v2 User’s Guide
26
Telecommunication Union) state-of-the-art industry standard). Unlike ADSL or
VDSL, G.SHDSL.bis supports the same high speed for transmission and receiving.
Figure 1 High-speed Internet Access with Your P-792H v2
For Internet access, connect the DSL port to the phone port. Then, connect your
computers or servers to the LAN ports for shared Internet access. (See the Quick
Start Guide for detailed instructions about hardware connections.) Next, set up
the P-792H v2 as a router or as a bridge, depending on the desired configuration.
1.1.2 High-speed Point-to-point Connections
You can use another P-792H v2 or any SHDSL device with the P-792H v2 to create
a cost-effective, high-speed connection for high-bandwidth applications such as
videoconferencing and distance learning.
Figure 2 Point-to-point Connections with Your P-792H v2
The P-792H v2s provide a simple, fast point-to-point connection between two
geographically-dispersed networks.
1.2 Ways to Manage the P-792H v2
Use any of the following methods to manage the P-792H v2.
• Web Configurator. This is recommended for everyday management of the P-
792H v2 using a (supported) web browser. See Chapter 2 on page 29.
G.SHDSL