Chapter 21 Tools
P-792H v2 User’s Guide
277
21.3 The Configuration Screen
See Section 21.1.4 on page 269 for transferring configuration files using FTP/TFTP
commands.
Click Maintenance > Tools > Configuration. Information related to factory
defaults, backup configuration, and restoring configuration appears in this screen,
as shown next.
Figure 123 Maintenance > Tools > Configuration
Backup Configuration
Backup Configuration allows you to back up (save) the P-792H v2’s current
configuration to a file on your computer. Once your P-792H v2 is configured and
functioning properly, it is highly recommended that you back up your configuration
file before making configuration changes. The backup configuration file will be
useful in case you need to return to your previous settings.
Click Backup to save the P-792H v2’s current configuration to your computer.
Restore Configuration
Restore Configuration allows you to upload a new or previously saved
configuration file from your computer to your P-792H v2.
Table 102 Restore Configuration
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click
Browse ... to find it.
Browse... Click this to find the file you want to upload. Remember that you must
decompress compressed (.ZIP) files before you can upload them.
Upload Click this to begin the upload process.
To Next Page
Loading...
